FingerTec OFISTA | Providing fingerprint, face recognition, and card solutions for your time attendance and access control needs

To meet the demands of small-sized companies, OFIS TA incorporates the highly sensitive PC-based fingerprint scanner with TCMS V2 to produce an effective time and attendance system that is not only user-friendly but also fraud proof. With OFIS TA there is no complicated hardware installation required and the system can be applied to any environment that has computers. In addition to providing simple solutions to smaller sized companies, OFIS TA also can be used as enrollment stations for larger corporations that are deploying multiple units of FingerTec® readers in their corporations.

OFIS TA can store as many fingerprint templates as possible depending on the storage capacity of the computer and the fingerprint templates from OFIS TA are transferable to all FingerTec® readers. Therefore, the templates captured can be used as main templates and they can be transferred to select readers accordingly.

OFIS TA, a simple fingerprint solution that provides superior benefits to all FingerTec® users.

FEATURES & BENEFITS
	Combination of PIN and biometrics or ONLY biometrics verification to eliminate fraud
	Fast and precise verification with FingerTec® OFIS Scanner
	Allow 1:1 and 1:N fingerprint verifications
	Unlimited user capacity for 1:1 fingerprint verifications; 1:N based on PC capacity
	Hassle-free fingerprint registration and verification
	Works well with dry, moist or rough fingerprints

MINIMUM SYSTEM REQUIREMENTS
	Pentium III 450MHz or higher PC compatible processor
	128MB RAM and above
	30MB free disk space for TCMS V2 software, recommended 100MB or higher for database
	Microsoft Windows 98SE/ME/2000/XP
	Latest updates and patches for Microsoft Windows are recommended

SYSTEM DIAGRAM


Single OFIS TA (Standalone)	NOTE: For illustration only *PC is not included


OFIS TA as Enrollment Stations	NOTE: For illustration only *PC is not included

SPECIFICATIONS

Pixel resolution	512 dpi (average x, y over the scan area)
Scan capture area	17 mm (width at center), 18.1 mm (length)
Scan data	8-bit grayscale (256 levels of gray)
Terminal size (approximate)	87 mm x 58 mm x 24 mm
Compatibility	USB 1.0, 1.1 and 2.0 (full speed) specifications
OS/Browser	MS Windows / MS Internet Explorer (IE 6)
Power supply voltage	5.0V +/-0.25V USB supply
Supply current - Scanning	100mA (typical）
Supply current - Idle mode	30mA（typical）
Supply current - Suspend mode	1.5mA（max )
ESD susceptibility	>15 KV, mounted in case
Operating Temperature (°C)	0 - 40
Operating Humidity (%)	20 - 80, non-condensing
Standard FCC Class	FCC Class B, CE, USB
Usage	Indoor, home and office use

OFIS TA Packaging
Dimension (mm)	:	150(L) x 50(W) x 270(H)
Weight	:	360g

www.fingertec.com