Are you encountering any problems with your FingerTec terminals and TCMS V2 software?
Please perform these troubleshooting steps below before you continue with anything else.
Check the Power Supply
Technical specifications of the terminals are listed Here. Please make sure that your terminal is using the correct power supply to avoid insufficient power supply or overload of the power supply which could cause hardware damage.
Downloading Latest Firmware Updates
Please check that your hardware is loaded with the latest firmware for it to work optimally. Go to this site to download the latest firmware and update it to your relevant terminals.
Resetting to Original Factory Setting
The settings in the terminal might be wrongly set and the best way to make sure that the settings are correct is to reset the terminals to the original factory settings. Please be assured that this reset will NOT delete user information and transaction logs stored in the terminals OR reset the time zone/ group time zone settings.
Follow the steps below to reset the terminals to their original factory settings:
Black & White Screen Models:
Reset Default Factory Settings
Colour Screen Models:
Reset All Factory Settings
If the problem still persists after doing the above 3 steps, try the following steps:
For parts that are over warranty period or unwarranted, contact email@example.com to purchase the said parts.
The claimed parts will be processed by FingerTec and sent to you at your own shipping cost, the usual practice is to include the parts in the shipment of other items. Should you require you parts to be sent immediately, kindly contact firstname.lastname@example.org and we will quote you the best shipping method available.
The return of the defective claimed warranted parts back to FingerTec is compulsory. All distributors and resellers are required to return all the parts to us on January and July every year. Kindly collect all the relevant parts and return to us by standard shipping twice a year.
FingerTec allows distributors to perform advanced repairs on the parts to avoid the hassle of warranty claims. However, there are certain conditions which need to be fulfilled before your company is allowed to attempt this advanced repair.