Brochure Installation Guide
Enhanced Security with Encrypted Signals*
It supports FingerTec encrypted 26-bit Wiegand communication output; providing enhanced security level for extra protection.
Power Up Terminals & Door Lock Systems
A single AdapTec-X can support a maximum of 2 units of FingerTec terminals and 2 sets of door lock accessories such as the EM Lock and drop bolt in one single system installation.
Prolonged Life Span of Hardware
With data encryption, the life span of the terminals can be prolonged without the risk of short circuiting when using AdapTec-X.
Control IN/OUT Terminals At An Entrance
AdapTec-X is a perfect choice for an IN/OUT installation, where a door is controlled both at the entrance and the exit.
Power Supply and Battery
AdapTec-X connects to a 12VDC switching power supply as power input to operate, and a 12VDC rechargeable backup battery to provide power to ensure protection of access during any events of power failure.
Alert Emergency with Siren
Compatible with an NC siren type with a maximum of 0.5A load for emergency event. E.g. if the terminal is being illegally dismantled.
Seamless Integration with FingerTec Terminals
Mix and match the FingerTec terminals via AdapTec-X for a cost effective access control system suitable for small and medium sized offices.
DIY Metal Casing for Cleaner Installation
Store AdapTec-X, with its power supply and a backup battery in an exclusive FingerTec DIY metal casing, providing a cleaner installation.
Installation Diagram
for illustration only
*How AdapTec-X Enhances Security
To provide you enhanced security, AdapTec-X will only recognize encrypted Wiegand signals from FingerTec terminals in order to unlock its doors. The code of the encrypted signals is written into the firmware of FingerTec terminals, which cannot be duplicated into other devices. This prevents hackers from bypassing this by simply providing the relay signal to AdapTec-X. Furthermore, separate power outputs for the door lock system and FingerTec terminals will keep the door locked even during any failures (i.e.: vandalism to terminals, etc.). For added security, a siren output port is ready to be linked up to alarms or sirens to produce alert sounds in case of forced door openings.
• Surface finishing Acrylonitrile Butadiene Styrene (ABS)
• Dimension, mm 85 x 96 x 33
• Weight, kg 0.1
• CPU High Performance RISC CPU
• Power input 12VDC 3A
• Power output 12VDC 3A
• Backup Power system UPS or 12VDC Rechargeable battery
• Input signal 26-bit FingerTec encrypted Weigand signal
• Output signal 12VDC 0.5A Siren
12VDC 3A EM output (NO/NC Type door locks)
• Over input voltage Yes, 3 long beeps
• Door release Yes, 2 short beeps
• Door forced open Yes, continuous beeps (May opt to output external siren system)
• Illegal dismantling of FingerTec terminals Yes, continuous beeps (May opt to output external siren system)
• Door unlock timer VR type, LED blinks to indicate unlock time in Seconds
• On Board LED indicators EM LED lit up – Door lock output is working
Status LED lit up – CPU is working
Battery low LED lit up – Battery is low and cut-off
• Over voltage alarm > 15 VDC
• Fuses PTC type
• Battery cut-off 8.5 ~ 9.5 VDC
NOTE: Specifications are subject to change. Check for latest product information.

Dimension (mm): 173 (L) x 60 (W) x 135 (H)
Weight: 0.3kg